Designed for the Transfer of Liquefied Petroleum Gas. Manufactured with CS inner and outer wire and polyamide reinforcement. Also available in 316SS inner and outer wires. Available with crimped on schedule 80 carbon steel or stainless steel threaded ends. Also available with ANSI flanges. All assemblies are hydrostatically tested and are tested for electrical continuity. CSA certified to CAN/CGA-8.1-M86.
Unit of Measure
Specifications
Diameter |
N/A 1 1/4 in2 in |
Maximum Length |
N/A 100 ft |
Bend Radius at 1 1/4 Inch (in) Diameter |
N/A 5 in |
Bend Radius at 2 Inch (in) Diameter |
N/A 7 in |
Weight Per Foot at 1 1/4 Inch (in) Diameter |
N/A 1.1 lb |
Weight Per Foot at 2 Inch (in) Diameter |
N/A 1.7 lb |
Maximum Working Pressure |
N/A 350 psi |
Safety Factor |
N/A 5:1 |
Temperature Range |
N/A -130 to 176 ºF-90 to +80 ºC |
Inner Helix Material |
N/A 316 Stainless Steel Carbon Steel |
Outer Helix Material |
N/A 316 Stainless Steel Carbon Steel |
Reinforcement |
N/A Polyamide |
Media |
N/A Liquefied Petroleum Gas (LPG) |
Industry Standards/Certifications |
N/A Canadian Standards Association (CSA) certified to CAN/CGA-8.1-M86. |
