McGill Hose & Coupling, Inc. - Corroline Plus Hose Assemblies

Unit of Measure

Items	2944 1/2 Inch (in) Nominal Size Corroline Plus Hose Assembly	2945 3/4 Inch (in) Nominal Size Corroline Plus Hose Assembly	2946 1 Inch (in) Nominal Size Corroline Plus Hose Assembly	2947 1 1/4 Inch (in) Nominal Size Corroline Plus Hose Assembly	2948 1 1/2 Inch (in) Nominal Size Corroline Plus Hose Assembly
Nominal Size	N/A 1/2 in13 mm	N/A 3/4 in20 mm	N/A 1 in25 mm	N/A 1 1/4 in32 mm	N/A 1 1/2 in40 mm
Actual Bore Size	N/A 0.51 in13.0 mm	N/A 0.76 in19.4 mm	N/A 1.01 in25.7 mm	N/A 1.26 in32.0 mm	N/A 1.51 in38.5 mm
Outside Diameter	N/A 0.85 in21.5 mm	N/A 1.12 in28.5 mm	N/A 1.45 in37.0 mm	N/A 1.75 in44.6 mm	N/A 2.03 in51.7 mm
Maximum Working Pressure	N/A 1000 psi69 bar	N/A 624 psi43 bar	N/A 600 psi41 bar	N/A 550 psi38 bar	N/A 500 psi34 bar
Minimum Bend Radius	N/A 1 3/8 in38 mm	N/A 2 in50 mm	N/A 2 3/4 in70 mm	N/A 3 5/16 in100 mm	N/A 4 3/4 in120 mm
Maximum Continuous Length	N/A 100 ft30 m
Weight Per Unit Length	N/A 0.40 kg/m0.27 lb/ft	N/A 0.70 kg/m0.47 lb/ft	N/A 1.10 kg/m0.74 lb/ft	N/A 1.60 kg/m1.07 lb/ft	N/A 1.92 kg/m1.29 lb/ft
Vacuum Limitations	N/A Usable at vacuum to -0.9 bar up to 150ºC/302ºF.
Flexibility	N/A Much less force to bend than any other smooth bore PTFE lined hose product.
Kink Resistance	N/A Much more resistant to kinking than any other smooth bore PTFE lined hose product, and much more kink resistant than the previous Corroline product.
Fire Resistance	N/A Corroline+ hose is Fireproof to BS5173 Section 103.13 Parts 6.2 and 6.3, and Corroline+ hose assemblies can be upgraded to Fireproof by applying DBK 300 at each end. All assemblies comply with the flammability requirement as set out in EN 16643.
Rolling U Flex Life Test	N/A More than 100 × the flex life to failure compared with all other types of smooth bore PTFE, FEP and PFA lined rubber covered hose products.
Flow Rates	N/A More than 2 times the flow rates for convoluted bore hose designs. Consult Aflex Hose for specific flow rate information.
Gas Permeability	N/A Reduced gas permeability compared with other PTFE lined hose designs, due to the heavy compression applied to the PTFE during processing, which reduces porosity.
Media	N/A Chemical
Pressure and Temperature Limitations	N/A Maximum Working Pressure As listed above apply from -40ºC (-40ºF) up to the maximum operating temperature of 150ºC (302ºF). Burst Pressure The hose burst pressures are equal to or more than the maximum working pressures × 4.
Construction	N/A Corroline is built around a patented PTFE hose liner design, which has a slightly rippled smooth bore inside, but convoluted outside to generate excellent flexibility combined with "hoop strength". A stainless helical wire is wound in to the external convolutions, which adds to the kink resistance, crush resistance and the resistance of the hose to both pressure and vacuum. This reinforced PTFE Liner construction is strong enough to withstand full vacuum and kinking without the need for either internal convolutions or the need to bond the liner to an outer cover, making it an ideal hose liner design, and a significant improvement upon standard products currently available. The PTFE liner is then further reinforced with an outer braid, either a Stainless Steel wire braid (SS Grade) or a Polypropylene braid (PB Grade) to provide two braided hose grades. The most popular grade (RC Grade) includes an outer cover of abrasion resistant, black antistatic EPDM rubber which is extruded on to a SS braided liner, with a super-smooth surface finish to aid external cleaning. A yellow, "CORROLINE" stripe is printed on to the cover. Other texts and colored stripes are also available to special order.