McGill Hose & Coupling, Inc.
McGill Hose & Coupling, Inc.
41 Benton Dr, East Longmeadow
MA 01028
Phone: 413.525.3977
Fax: 800.669.14967
Email: sales@mcgillhose.com
Website: www.mcgillhose.com
Print Back
Corroline hose was designed and developed to provide customers with a universal chemical hose product which combined all the requirements they had requested for chemical plant applications, particularly the need for improved flexibility. Corroline hose not only supersedes but also improves upon the wide variety of alternative Chemical Hose products currently available.
Unit of Measure

Specifications

Nominal Size

 N/A 1 in25 mm

Actual Bore Size

 N/A 1.01 in25.7 mm

Outside Diameter

 N/A 1.45 in37.0 mm

Maximum Working Pressure

 N/A 600 psi41 bar

Minimum Bend Radius

 N/A 2 3/4 in70 mm

Maximum Continuous Length

 N/A 100 ft30 m

Weight Per Unit Length

 N/A 1.10 kg/m0.74 lb/ft

Vacuum Limitations

 N/A Usable at vacuum to -0.9 bar up to 150ºC/302ºF.

Flexibility

 N/A Much less force to bend than any other smooth bore PTFE lined hose product.

Kink Resistance

 N/A Much more resistant to kinking than any other smooth bore PTFE lined hose product, and much more kink resistant than the previous Corroline product.

Fire Resistance

 N/A Corroline+ hose is Fireproof to BS5173 Section 103.13 Parts 6.2 and 6.3, and Corroline+ hose assemblies can be upgraded to Fireproof by applying DBK 300 at each end. All assemblies comply with the flammability requirement as set out in EN 16643.

Rolling U Flex Life Test

 N/A More than 100 × the flex life to failure compared with all other types of smooth bore PTFE, FEP and PFA lined rubber covered hose products.

Flow Rates

 N/A More than 2 times the flow rates for convoluted bore hose designs. Consult Aflex Hose for specific flow rate information.

Gas Permeability

 N/A Reduced gas permeability compared with other PTFE lined hose designs, due to the heavy compression applied to the PTFE during processing, which reduces porosity.

Media

 N/A Chemical

Pressure and Temperature Limitations

Pressure and Temperature Limitations

 N/A Maximum Working Pressure
As listed above apply from -40ºC (-40ºF) up to the maximum operating temperature of 150ºC (302ºF).

Burst Pressure
The hose burst pressures are equal to or more than the maximum working pressures × 4.

Construction

Construction

 N/A Corroline is built around a patented PTFE hose liner design, which has a slightly rippled smooth bore inside, but convoluted outside to generate excellent flexibility combined with "hoop strength".
A stainless helical wire is wound in to the external convolutions, which adds to the kink resistance, crush resistance and the resistance of the hose to both pressure and vacuum.
This reinforced PTFE Liner construction is strong enough to withstand full vacuum and kinking without the need for either internal convolutions or the need to bond the liner to an outer cover, making it an ideal hose liner design, and a significant improvement upon standard products currently available.
The PTFE liner is then further reinforced with an outer braid, either a Stainless Steel wire braid (SS Grade) or a Polypropylene braid (PB Grade) to provide two braided hose grades.
The most popular grade (RC Grade) includes an outer cover of abrasion resistant, black antistatic EPDM rubber which is extruded on to a SS braided liner, with a super-smooth surface finish to aid external cleaning. A yellow, "CORROLINE" stripe is printed on to the cover. Other texts and colored stripes are also available to special order.